{"id":8959,"date":"2024-02-14T09:46:54","date_gmt":"2024-02-14T06:16:54","guid":{"rendered":"https:\/\/kimiafiber.com\/product\/unsaturated-polyester-resin-nadpolymer-1-nad-1114\/"},"modified":"2024-02-14T09:46:54","modified_gmt":"2024-02-14T06:16:54","slug":"unsaturated-polyester-resin-nadpolymer-1-nad-1114","status":"publish","type":"product","link":"https:\/\/kimiafiber.com\/en\/product\/unsaturated-polyester-resin-nadpolymer-1-nad-1114\/","title":{"rendered":"Unsaturated polyester resin Nadpolymer 1\/NAD-1114"},"content":{"rendered":"

Unsaturated Polyester Resin NAD-1114\/1<\/strong><\/h3>\n

Characteristics of Liquid Resin NAD-1114\/1<\/strong><\/p>\n

NAD-1114\/1<\/strong> resin is an orthophthalic polyester resin with wide applications in various industries. Due to its special physical and chemical properties, this resin is used in the production of various parts and molding.<\/p>\n

Characteristics of Liquid Resin<\/h3>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Test Method<\/strong><\/th>\nValue<\/strong><\/th>\nUnit<\/strong><\/th>\nProperty<\/strong><\/th>\n<\/tr>\n<\/thead>\n
ASTM D 1544<\/td>\n3><\/td>\nGardner<\/td>\nColor<\/td>\n<\/tr>\n
NA<\/td>\nClear, yellow<\/td>\nNA<\/td>\nAppearance<\/td>\n<\/tr>\n
ISO 2114<\/td>\n20-30<\/td>\nmgr KOH\/gr<\/td>\nAcid Value<\/td>\n<\/tr>\n
ISO 2555<\/td>\n350-450<\/td>\nmPa.s(cps) @25\u00b0C<\/td>\nViscosity<\/td>\n<\/tr>\n
ASTM D 1475<\/td>\n1.12-1.14<\/td>\ng\/cm\u00b3<\/td>\nDensity<\/td>\n<\/tr>\n
ISO 3251<\/td>\n60-65<\/td>\n%Wt<\/td>\nSolid Content<\/td>\n<\/tr>\n
ISO 2535<\/td>\n10-20<\/td>\n@25\u00b0C<\/td>\nGel time<\/td>\n<\/tr>\n
ISO 2535<\/td>\n13-25<\/td>\n\u00a0@25\u00b0C<\/td>\nCooking time<\/td>\n<\/tr>\n
ISO 2535<\/td>\n170\u00b110<\/td>\n\u00b0C @25\u00b0C<\/td>\nPeak exothermic temperature<\/td>\n<\/tr>\n
ISO 2535<\/td>\n12-30<\/td>\n\u00b0C @25\u00b0C<\/td>\nA<\/td>\n<\/tr>\n
ISO 2535<\/td>\n22-40<\/td>\n\u00b0C @25\u00b0C<\/td>\nB<\/td>\n<\/tr>\n
ISO 2535<\/td>\n1.8\u00b10.2<\/td>\n\u2013<\/td>\nb\/a<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Mechanical properties of refined transparent castings<\/h3>\n\n\n\n\n\n\n\nISO 178<\/td>\nISO 178<\/td>\nISO 75-2<\/td>\n\n\n\n
Test method<\/strong><\/th>\nValue<\/strong><\/th>\nUnit<\/strong><\/th>\nProperty<\/strong><\/th>\n<\/tr>\n<\/thead>\n
ISO 527-2<\/td>\n70\u00b15<\/td>\nMPa<\/td>\nTensile strength<\/td>\n<\/tr>\n
ISO 527-2<\/td>\n3.5\u00b10.5<\/td>\nGPa<\/td>\nTensile modulus<\/td>\n<\/tr>\n
ISO 527-2<\/p>\n4<<\/td>\n%<\/td>\nElongation at break<\/td>\n<\/tr>\n
110-130<\/td>\nMPa<\/td>\nFlexural strength<\/td>\n<\/tr>\n
3.5\u00b10.5<\/td>\nGPa<\/td>\nFlexural modulus<\/td>\n<\/tr>\n
55\u00b15<\/td>\n\u00b0C<\/td>\nHeat deflection temperature<\/td>\n<\/tr>\n
ASTM D2583<\/td>\n40-45<\/td>\n\u2013<\/td>\nBarcol Hardness<\/td>\n<\/tr>\n
ASTM D2566<\/td>\n0.5-1.5<\/td>\n%<\/td>\nLinear Shrinkage<\/td>\n<\/tr>\n
ISO 62<\/td>\n0.1-0.3<\/td>\n%<\/td>\nWater Absorption<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Formulation for Room Temperature Curing<\/h3>\n\n\n\n\n\n\n
Amount<\/strong><\/th>\nProperty<\/strong><\/th>\nMaterial Name<\/strong><\/th>\n<\/tr>\n<\/thead>\n
1.5<\/td>\nCatalyst<\/td>\nMEKP A60<\/td>\n<\/tr>\n
0.1<\/td>\nAccelerator<\/td>\nCobalt octoate 10%<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

After curing unsaturated polyester resin<\/h3>\n

For most applications where the molded product is used at ambient temperature, satisfactory sheets can be produced without post-curing at elevated temperatures, provided that the shop temperature is less than not lower than 20\u00b0C.
\nFor more critical applications, where optimum properties are required, or where the molding temperature is above ambient, post-curing at elevated temperatures is recommended.
\nThe optimum temperature for NAD-1114\/1 is 80\u00b0C. After removal from the mold, the sheets should be allowed to mature for 24 hours at a shop temperature not lower than 20\u00b0C.<\/p>\n

Before post-curing, place the part in an oven with suitable support to prevent warping and increase the temperature from ambient to 80\u00b0C in 10\u00b0C steps.
\nLeave the mold at 80\u00b0C for three hours and then turn off the oven. Allow the mold to cool slowly in the oven. After curing, it is most effective if done immediately after the 24-hour maturation period.<\/p>\n

Storage conditions for unsaturated polyester resin<\/h3>\n

NAD-1114\/1 is a product sensitive to temperature, light and oxidation. Therefore, it should be stored indoors in a dry place at a temperature between 5 and 25\u00b0C. Always keep in the original, unopened and undamaged containers. Avoid storing the material in direct sunlight.
\nNAD-1114\/1 should be stored in the dark in suitable closed containers. Here, it is recommended that the storage temperature is below 20\u00b0C, but should not exceed 30\u00b0C.
\nIdeally, the containers should be opened immediately before use. Where they are to be stored outdoors, it is recommended that the drums are placed in a horizontal position to prevent possible water ingress.<\/p>\n

Packaging<\/h3>\n

NAD-1114\/1 unsaturated polyester resin is supplied in 200 kg drums.<\/p>\n

\"Unsaturated<\/a><\/p>\n

Shelf Life<\/h3>\n

At least 4 months after production.<\/p>\n

Health and Safety<\/h3>\n

Depending on the curing system used, see the applicable Material Safety Data Sheets.
\nAll information in this data sheet is based on testsIt is laboratory and not intended for design purposes.<\/p>\n","protected":false},"excerpt":{"rendered":"

Weight: 200 kg<\/span>
\nPackaging: Barrel<\/span><\/p>\n

Note: Orders over 10 barrels are negotiable. Please contact us for bulk order pricing.<\/span><\/p>\n

Features and Applications<\/strong>:<\/strong><\/p>\n

    \n
  • Resin Type<\/strong>:<\/strong> Medium Viscosity Orthophthalic Polyester<\/li>\n
  • Solvent<\/strong>:<\/strong> Styrene Monomer<\/li>\n
  • Applications<\/strong>:<\/strong> This resin is specifically designed for spray, roller, brush and contact molding processes<\/strong>. The NAD-1114’s versatile features make it an efficient option for producing decorative objects, durable sheets, and architectural panels<\/strong>.<\/li>\n<\/ul>\n

     <\/p>\n","protected":false},"featured_media":6014,"comment_status":"open","ping_status":"closed","template":"","meta":[],"product_brand":[],"product_cat":[836,835],"product_tag":[1139,843,1092,1083,844,1041,1084],"class_list":["post-8959","product","type-product","status-publish","has-post-thumbnail","product_cat-polyester","product_cat-resins","product_tag-application-of-unsaturated-polyester-resin","product_tag-buy-polyester-resin","product_tag-nadpolymer-resin","product_tag-polyester-resin-price","product_tag-properties-of-unsaturated-polyester-resin","product_tag-resin","product_tag-unsaturated-polyester-resin-price","first","instock","taxable","shipping-taxable","product-type-variable"],"_links":{"self":[{"href":"https:\/\/kimiafiber.com\/en\/wp-json\/wp\/v2\/product\/8959","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/kimiafiber.com\/en\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/kimiafiber.com\/en\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/kimiafiber.com\/en\/wp-json\/wp\/v2\/comments?post=8959"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/kimiafiber.com\/en\/wp-json\/wp\/v2\/media\/6014"}],"wp:attachment":[{"href":"https:\/\/kimiafiber.com\/en\/wp-json\/wp\/v2\/media?parent=8959"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/kimiafiber.com\/en\/wp-json\/wp\/v2\/product_brand?post=8959"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/kimiafiber.com\/en\/wp-json\/wp\/v2\/product_cat?post=8959"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/kimiafiber.com\/en\/wp-json\/wp\/v2\/product_tag?post=8959"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}